[1]李伟光,张占宽*.表面微织构硬质合金对桦木摩擦特性的影响[J].林业工程学报,2018,3(01):103-108.
 LI Weiguang,ZHANG Zhankuan*.Effect of surface micro-texture cemented carbide on friction characteristics of birch[J].Journal of Forestry Engineering,2018,3(01):103-108.
点击复制

表面微织构硬质合金对桦木摩擦特性的影响()
分享到:

《林业工程学报》[ISSN:1001-8081/CN:32-1160/S]

卷:
3
期数:
2018年01期
页码:
103-108
栏目:
装备与信息化
出版日期:
2018-01-15

文章信息/Info

Title:
Effect of surface micro-texture cemented carbide on friction characteristics of birch
文章编号:
2096-1359(2018)01-0103-06
作者:
李伟光张占宽*
中国林业科学研究院木材工业研究所,北京 100091
Author(s):
LI Weiguang ZHANG Zhankuan*
Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China
关键词:
木材切削 微织构 摩擦系数 桦木 木工刀具
Keywords:
wood cutting micro-texture friction coefficient Biroh(Betula spp.) wood machining
分类号:
TS643
文献标志码:
A
摘要:
微织构是一种改进材料摩擦性能的有效措施。选取桦木为研究对象,在不同载荷和木材含水率条件下,研究了有无织构的硬质合金试样对桦木表面摩擦系数的影响。结果表明,在深度20 μm、直径50 μm和中心孔间距为150 μm的硬质合金表面微织构情况下,其表面的浸润性优于平面,亲水性较强,其表面与桦木间的摩擦系数低于平面与桦木产生的摩擦系数。在木材含水率为40%、载荷为10 N的情况下,平面和微织构的平均摩擦系数分别为0.121和0.043,随着作用载荷的提高,摩擦系数也逐渐提高。合理的微织构形式可以有效降低木材与硬质合金间的摩擦系数。将织构技术应用到木材切削中,可以为木工刀具减磨技术研究提供一条新途径。
Abstract:
Micro-texture is a kind of effective measures to improve material friction performance. Birch(Betula spp.)was selected as the cutting samples. Under the different loads and wood moisture contents, the influence of cemented carbide sample with or without texture on the friction coefficient of birch surface was studied. The results showed that, when the cutting depth, diameter and center hole spacing of micro-texture were 20 μm, 50 μm and 150 μm, respectively, the wettability of the micro-texture surface was better than that of plane surface, with strong hydrophilic property. The coefficient of friction between the micro-texture surface and birch was lower than that between the plane surface and birch. In the case of 40% wood moisture content and 10 N loading, the average friction coefficient of plane and micro-texture was 0.121 and 0.043, respectively. With the increase of working load, the coefficient of friction between the surfaces increased. Reasonable micro-texture form can effectively reduce the friction coefficient between birch and cemented carbide. The friction performance was affected by the wood moisture content, applied load and other factors. The texture technology can be applied to wood cutting, aiming at exploring the mechanism of micro-texture antifriction and providing a new way for antifriction technology in the wood machining.

参考文献/References:

[1] 曹平祥. 木工刀具抗磨技术进展[J].林业科技开发,1997(6): 10-12.
CAO P X. The progress of woodworking tools anti-wear technology[J]. China Forestry Science and Technology, 1997(6): 10-12.
[2] 曹平祥,王毅,周兆斌. 木工刀具磨损机理及抗磨技术[J].林产工业,2003,30(5): 19-21.
CAO P X, WANG Y, ZHOU Z B. Wear mechanism of wood cutting tool and wear-resistant technique[J]. China Forest Products Industry, 2003, 30(5): 19-21.
[3] 曾娟,张占宽. 润滑耐磨功能涂料在木工刀具上的应用[J].木材加工机械,2007(2): 48-50.
ZENG J, ZHANG Z K. Application of wear-resistant and lubricating coating for wood cutting tools[J]. Wood Processing Machinery, 2007(2): 48-50.
[4] McKENZIE W M. Friction in wood cutting[J]. Forest Products Journal, 1967, 17: 38.
[5] McKENZIE W M, KARPOVICH H. The frictional behaviour of wood[J]. Wood Science and Technology, 1968, 2(2): 139-152.
[6] MURASE Y. Effect of surface roughness of steel and wood variables on repeated friction between wood and steel[J]. Journal of the Japan Wood Research Society, 1978, 24: 865-872.
[7] KATO C, KAWAI Y, SOGA K, et al. The wear characteristic of a wood working knife with Chromium plating III. The self-sharpening characteristics in orthogonal cutting of wood parallel to the grain[J]. Journal of the Japan Wood Research Society, 1991, 37(11): 1004-1010.
[8] 李黎. 表面涂层木工刀具的研究进展[J].木材工业, 2007, 21(4): 1-4.
LI L. Advances in research on wood cutting tools plated with membranes[J]. China Wood Industry, 2007, 21(4): 1-4.
[9] 马岩. 国外木材切削理论研究的进展[J].木材加工机械,2008(4): 35-39.
MA Y. The development of theory of wood cutting abroad[J]. Wood Processing Machinery, 2008(4): 35-39.
[10] 朱兆龙,郭晓磊,赵飞,等. 陶瓷刀具车削木质复合材料的切削性能[J].林业工程学报,2017,2(1): 119-124.
ZHU Z L, GUO X L, ZHAO F, et al. Cutting performance of ceramic tool in turning wood-based composites[J].Journal of Forestry Engineering,2017,2(1): 119-124.
[11] 马岩. 国外木材切削刀具设计理论研究新进展[J]. 林业机械与木工设备,2007,35(3): 4-8.
MA Y. The new development of theory research in design of timber cutter abroad[J]. Forestry Machinery & Woodworking Equipment, 2007, 35(3): 4-8.
[12] MANABU W, YUKIHIKO Y, SHUZO K, et al. Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact[J]. Wear, 2003, 254(3/4): 356-363.
[13] NORITAKA K, HIROSHI S, HIDEKI M, et al. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior[J]. Precision Engineering, 2009, 33(3): 248-254.
[14] LEI S T, DEVARAJAN S, CHANG Z H. A study of micropool lubricated cutting tool in machining of mild steel[J]. Journal of Materials Processing Technology, 2009, 209(3): 1612-1620.
[15] SHINKARENKO A, KLIGERMAN Y, ETSION I. The effect of surface texturing in soft elasto-hydrodynamic lubrication[J]. Tribology International, 2009, 42(2): 284-292.
[16] WENZEL R N. Resistance of solid surfaces to wetting by water[J]. Industrial and Engineering Chemistry, 1936, 28(8): 988-994.

备注/Memo

备注/Memo:
收稿日期:2017-06-27 修回日期:2017-08-03
基金项目:国家自然科学基金(31270605)。
作者简介:李伟光,男,助理研究员,研究方向为木材切削原理与刀具。通信作者:张占宽,男,研究员。E-mail:zhangzk@criwi.org.cn
更新日期/Last Update: 2018-01-10